Land Rover: Range Rover, Sport, LR3, HSE Instrument Cluster Repair Service
$429.00
Product Description
Attention: This repair service is for: Range Rover, Sport, LR3 and HSE models that have the fuel and temperature gauges located in the center of the cluster and Not VDO Clusters found on certain Supercharged models where the fuel and temp gauges are on either end of the cluster.
Vehicles covered in this repair service include:
2005 - 2009 LR3
2006 - 2009 Range Rover / Range Rover Sport
ATTENTION: Due to the complexity of your vehicles electronics, it is recommended that you have your issues properly diagnosed before sending in the cluster for repairs (unless fading screens and power loss is one of the problems) since we will be repairing your unit based on your diagnoses of the problem. Other factors can cause warning messages to come up on your screen and warning lamps to illuminate, although we have found that if you are experiencing the symptoms listed below it is generally a cluster problem that we successfully repair for.
Symptoms covered in repair service include but are not limited to:
- Intermittent or inoperative instrument cluster
- No communication with cluster via scan tool and setting of lost cluster communication U codes.
- No start condition with inoperative cluster with MSP CAN BUS problems
- HDC unavailable message coming up in message center
- Hazard lights turn off and on by themselves
- No turn signals
- Door locks locking and unlocking by themselves
- HVAC going off and on
- Misc. warning lamps illuminated
- Error Messages appearing on center display screen
- No data on display screen
- Using trip button affecting cluster operation
NOTE: In addition to the repair service we take additional proprietary measures to help ensure the longevity of your repair.
BRAND NEW Replacement lenses are available for an additional $89 if yours is cracked and needing replacement.
Replacement of inoperative warning / turn signal chime is available for an additional fee or as a stand alone service
NOTICE: Attempted removal of or tampering with gauge needles will usually damage gauge motors which is not included in repair service so there will be an additional charge for replacement gauge motors.
Also, previous repair attempts which have made to the circuit board or components can further damage cluster thus complicating repairs or even cause permanent damage which will affect the longevity of the repair service thus affecting the warranty.
An additional surcharge may me be applied for any additional parts or labor required to do the repairs as a result of tampering but, you will be notified if this is the case.